PLANET DVR-460 - Manual (Page 2)

DVR-460 Installation
Installing HDD
1. Loosen the screws on the upper cover and open the upper cover
of the DVR.
2. Screw out the HDD bracket. For the positions of the HDD bracket
screws, please refer to the figure below.
3. When install the first HDD, please set the jumper on the HDD to
“Master” mode.
4. Screw HDD onto the HDD bracket, two screws for each side.
And then screw the HDD bracket back to the DVR base. (Refer
to Fig.1 & 2).