PLANET CAM-IR554 - Manual (Page 2)

50 meter Infra-Red Outddor Camera– CAM-IR554
1 Sunshield
2 Camera lens
3 High efficiency infrared LED
4 BNC connector
5 DC connector
6 Screw holes for bracket fixing
1. Packet Content
● CAM-IR554 x 1
● Quick installation guide x 1
● Screw Package x 1
● Bracket x 1
2. Installation
1. Please fix the CAM-IR554 to the bracket with screws
2. After installed finished, please place the camera to a suitable location.
3. Adjust the camera to the correct direction.
4. Connect video output connector to your DVR.
5. Connect a DC 12V power adapter to the Power Input connector.
Note
Before connect power adapter to camera, please make sure the power
output voltage is DC 12V (max. ±10%). If you can not sure this part, we
will suggest to use a DC 12V Switching power adapter. It can provide stably
power output.
3. Specification
Image pick-up device SONY 1/3" CCD Normal Resolution
Effective Picture Elements NTSC: 768 x 494, PAL: 752 x 582 (H x V)
Horizontal Resolution 540 TV lines
Minimum Illumination 0 LUX with built-in IR-LED
S/N Ratio More than 48 dB
Auto Electronic Shutter NTSC: 1/60s~1/100,000s, PAL: 1/50s~1/110,000s
Gain Control Automatically
White Balance Automatically (2500K~9500K)
Gamma Characteristic 0.45
Lens Furnished 8.0 mm / F1.6
View Angle 8mm: H: 33 Degree, V: 25 Degree
Synchronous System Internal, Negative sync.
Video Output 1 Vp-p Composite Video / 75 Ohms.
Power Supply DC 12V / 1.5A , 50/60 Hz
Power Consumption 8.5W
Operating Temp. -10˚C to 50˚C (14˚F to 122˚F)
Water Resistance IP-66
IR LED 35 Units of 850nm High Power IR LED.
IR Project Distance 50 Meters
Dimensions 110mm (φ) x 230mm (L)