PLANET CAM-IR138 User Manual
Packet content, Installation, Specification

– 1 –
– 2 –
– 3 –
– 4 –
15 meter Infra-Red Camera – CAM-IR138
1. Packet Content
1.
CAM-IR138
2.
Screw kit x 1
3.
Rack x 1
4.
Quick Installation Guide x 1
2. Installation
1.
Please fix the CAM-IR138 to a suitable location
with the Rack and Screws.
2.
Adjust the camera to the correct direction.
3.
Connect Video Output connector to your DVR.
4.
Connect a DC 12V power adapter to the Power
Input connector.
Note
Before connect power adapter to camera, please
make sure the power output voltage is DC 12V
(max. ±10%). If you can not sure this part, we
will suggest to use a DC 12V Switching power
adapter. It can provide stable power output.
3. Specification
Product
Model
CAM-IR138
Camera
Image device
Sony 1/3” CCD
Lens
Board Lens 3.6mm, F1.2
Angle of view H: 71 Degree,
V: 52 Degree
Min Illumination 0 lux @ F2.0
Effective Pixels
(H x V)
NTSC: 510 x 492, PAL: 500 x 582
IR LED
6 Units of 850nm High Efficiency IR LED
IR Project
Distance
15 Meters
Video
Horizontal
Resolution
420 TV lines
S/N Ratio
More than 48 dB
White Balance
Automatic (2300K~10500K)
Gamma
Characteristic
0.45
Video Output
1 Vp-p Composite Video / 75 Ohms
Function
Gain Control
Automatic
Auto Electronic
Shutter
NTSC: 1/60s~1/100,000s,
PAL: 1/50s~1/110,000s
Synchronous
System
Internal, Negative sync
General
Water
Resistance
IP-66
Power Supply
DC 12V, 1A
Operating
Temperature
-10 ~ 50 Degree C
(14 ~ 122 Degree F)
Dimension
(Φ x L)
54 x 80 mm