PLANET WPG-130N - Manual (Page 30)

PLANET 802.11n Pocket Presentation Gateway
30
disabled. However, when the WPG-130N is connected to a
LAN that does not have any DHCP server, the built-in DHCP
server of WPG-130N will be enabled and the clients of
WPG-130N will obtain IP address by itself.
Or you can select this option to use the fixed IP address for
WPG-130N. (Default Settings)
IP Address The default value is 192.168.1.1
Subnet Mask The default value is 255.255.255.0
Default Gateway The default value is 192.168.1.1
Use the following IP
address
DNS Server The default value is 192.168.1.1
DHCP Server Setup
Select “Auto” to enable the built-in DHCP server of
WPG-130N. (Default Settings)
Start IP The default value is 192.168.1.11
End IP The default value is 192.168.1.254
Subnet Mask The default value is 255.255.255.0
Default Gateway The default value is 192.168.1.1
Auto
DNS Server The default value is 192.168.1.1
Disable Or you can select this option to disable the DHCP server of
WPG-130N.
Wireless Setup
The option for enabling or disabling wireless LAN function Wireless LAN
Embedded AP
SSID You can configure the SSID string here
when Wireless LAN is enabled.
Region The default value is “Worldwide”.
SSID Broadcast The default value is “Enable”.
Channel If you select “Auto”, the WPG-130N will scan all of the wireless
channels and choose a clear one automatically. Or you can
select a fixed channel.
Encryption The option of wireless security. You can select one of WEP /
WPA-PSK / WPA2-PSK, or disable it.
Key If Encryption is enabled, you have to set the key according to
the encryption mode you selected.
AP Client
The option for enabling or disabling AP Client mode. By this
feature you can join other existed Access Point wirelessly. Connect to Existing AP
Existing AP
SSID Enter the SSID of the existed AP here
when AP Client mode is enabled.
Encryption The WPG-130N supports multiple encryption methods of
wireless security. Please choose the same encryption method
of wireless security with the existed AP you want to join.
Key Enter the key of the existed AP you want to join.
Table 4-2