PLANET WPG-120 - Manual (Page 24)

WPG-120 User Manual
1. IP address：IP address of WPG-120 device.
2. Subnet Mask：subnet mask
3. Default Gateway：default gateway
4. Wireless MAC address：wireless MAC address
Connection Status:
1. Projecting status: which is “Waiting for projecting” or “Projecting”
2. Total Users: It shows how many users login into WPG-120.
4.3.2 Network Setup
There are many kinds of operating configurations as below.
< Wireless Setup>
♦ Region: default value is “Worldwide”.
♦ SSID: SSID string, max. Length is 32 bytes.
♦ SSID Broadcast: The default value is “Enable”
♦ Channel: to set fixed channel or Auto.
In “Auto” mode the WPG-120 will scan all of wireless channels and
select one clear channel automatically.
♦ Encryption: you can select “Disable” or one of WEP/WPA/WPA2 64bit
or 128bit in ASCII or HEX string.
♦ Key: If Encryption is enabled, you have to set key value according to
the encryption mode you selected.
: press button to confirm changes.
: press button to abort action.
24