PLANET WPG-130N User Manual

Software installation – windows, Software installation – mac os x

Note

– 1 –

– 2 –

– 3 –

– 4 –

1. Package Contents

2. Physical Installation

3. Hardware Installation

– 7 –

– 8 –

– 5 –

– 6 –

Front Panel Description

Rear Panel Description

WPG-130N

Quick Guide

CD-ROM

World-Wide Adapter Set

VGA Adapter

Power Adapter

Further Information :
The above steps introduce simple installations and
configurations for WPG-130N. For further configurations of the
utility (WPG), Virtual Extended Screen, and Wi-Fi AP-Client etc,
please refer to the user’s manual in the CD. If you have further
questions, please contact the local dealer or distributor where
you purchased this product.

2011-E60050-001

Thank you for choosing PLANET WPG-130N. Before
installing the device, please verify the contents inside the
package box.

If there is any item missed or damaged, please
contact the seller immediately.

Step 1: Please turn on your projector first, and connect

the WPG-130N to the projector via VGA port.
Now you can power on WPG-130N.

Step 2: When the projector shows the default screen as

below, it indicates WPG-130N is ready now.

(US/EU/UK)

VGA Connector

Power LED

Power Connector

(5V DC Input)

Reset Button

Step 2: Open the web browser and it will redirect to

WPG-130N home page automatically, or you can
enter the default IP address 192.168.1.1 to
access it.

Step 3: Download the client utility (WPG) of Windows

7/Vista/XP and execute it. After installing the
program, you’ll see WPG shortcut on your PC
desktop.

Step 4: Launch WPG on the desktop, and then input the

Step 5: Click the button to start projection, or choose

one of the numbers 1~4 to project to the split
screen.

4. Software Installation – Windows

Step 1: Site survey the wireless signal of WPG-130N,

and connect your PC with it wirelessly.

Default SSID: WPG-130N
Default IP Address: 192.168.1.1
Default Username: admin
Default Password: admin

* The connection information can be found from the

projector screen.

Note

Please make sure the firewall in Windows will
allow the WPG software to pass through.

Power

Adapter

Power

Control panel for Screen Projection

Status Indicator

Software Installation – Mac OS X

WPG-130N

Quick Installation Guide

802.11n Pocket Presentation Gateway

Step 4: Launch WPG software and enter the login code.

Control panel for Screen Projection

Status Indicator

SSID: WPG-130N

Channel: 6

Security: OFF

Server IP: 192.168.1.1

Resolution: 1024 x 768

Version: 1.0.0.0

Step 2: Open the web browser and enter the default IP

address 192.168.1.1 to access the WPG-130N
home page.

Step 1: Enable your WiFi and connect to WPG-130N.

Step 3: Download the client utility (WPG) of Mac OS X

and execute it.