Igure, Ireless, Ddress – PLANET WNRT-627 User Manual
Page 69: Iltering
User’s Manual of WNRT-627
-69-
For example: If you desire that the wireless station A with MAC address 00-30-4F-11-22-33 and the
wireless station B with MAC address 00-30-4F-1A-2B-3C are able to access the Router, but all the
other wireless stations cannot access the Router, you can configure the Wireless MAC Address
Filtering list by following these steps:
Step 1. Click the Enable button to enable this function.
Step 2. Select the radio button: Deny the stations not specified by any enabled entries in the list
to access for Filtering Rules.
Step 3. Delete all or disable all entries if there are any entries already.
Step 4. Click the Add New... button and enter the MAC address 00-30-4F-11-22-33
/00-30-4F-1A-2B-3C in the MAC Address field, then enter wireless station A/B in the
Description field, while selecting Enabled in the Status pull-down list. Finally, click the Save
and the Back button.
The filtering rules that configured should be similar to the following list:
Figure 5-27 Wireless MAC Address Filtering