PLANET WNRT-625 - Manual (Page 5)

Hardware Installation
1..Locate an optimum location for the WNRT-625.. The. best. place.
for.your.WNRT-625.is.usually.at.the.center.of.your.wireless.network,.
with.line.of.sight.to.all.of.your.mobile.stations.
2.. Adjust the antennas of WNRT-625..Try.to.adjust.them.to.a.posi-
tion. that. can. best. cover. your. wireless. network.. The. antenna’s. posi-
tion.will.enhance.the.receiving.sensitivity.
3.. Connect xDSL/Cable Modem to WAN port of WNRT-625..
Usually,. this. cable. would. be. provided. with. your. modem.. If. no. cable.
was.supplied.with.your.modem,.please.use.a.RJ-45.Ethernet.cable
4..Connect all of your network devices to LAN port of WNRT-
625. Connect. all. your. computers,. network. devices. (network-enabled.
consumer.devices.other.than.computers,.like.game.console,.or.switch.
/. hub).Connect. one. of. the. LAN. ports. on. WNRT-625. to. your. LAN.
switch/hub.or.a.computer.with.a.RJ-45.cable..