PLANET WNL-9501 - Manual (Page 20)

802.11n Wireless PCI Express Adapte r
WNL‐9501
Step 1. Open Planet Wireless Utility and click WPS tab. Select Enter the PIN of this device into
my access point or wireless router. In the field beside PIN, you will see the PIN value
of the adapter which is randomly generated. Click Connect to continue.
Figure 3-2-6
Step 2. Open your router’s Web-based Utility and click WPS link on the left of the main menu.
Then click Add device and the following figure will appear. Enter the PIN value of the
adapter in the empty field beside PIN and then click Connect.
Figure 3-2-7
Step 3. When Connect successfully appears on the screen (as shown in Figure 3-2-8), the
WPS configuration is complete. Or you can view the adapter’s utility page to see whether
the connection has been successful (as shown in Figure 3-2-9).
20