PLANET WDRT-1200AC - Manual

Note
– 1 – – 2 –
– 3 – – 4 –
1. Package Contents
2. Hardware Installation
– 7 – – 8 –
5. Wireless Network Connection
4. Enter into the Web Management
– 5 – – 6 –
Wireless Router
12V / 2A Power Adapter
You have already finished the configuration of the
WDRT-1200AC. Now you can use your iPhone, iPad, laptop,
and any other Wi-Fi device to connect with it wirelessly and
start surfing the Internet.
2011-E50330-000
Thank you for choosing PLANET WDRT-1200AC. Before installing
the router, please verify the following items in the package box.
If there is any item missing or damaged, please
contact the seller immediately.
Step 2: Follow the figure below to connect the network
devices. It depends on your network environment
to connect the WAN port to a cable/xDSL modem,
or the Ethernet directly in your place.
Step 1: Connect the Power Adapter provided in the package
to the WDRT-1200AC. The Power LED on the front
panel will turn on accordingly.
Step 3: After you enter into the Web User Interface, please
follow the indications on the screen to quickly set
up for the Internet connection.
Default IP Address: 192.168.1.1
Default User Name: admin
Default Password: admin
Default SSID: WDRT-1200AC_2.4G
WDRT-1200AC_5G
Default Wireless Encryption Type: None
Step 2: Highlight the wireless network (SSID) to connect
and click [Connect] button.
Step 1: Right-click on the network icon displayed in the
system tray.
Quick Guide
WDRT-1200AC
Quick Installation Guide
1200Mbps 802.11ac Dual-Band Wireless
Gigabit Router
Step 1: The Web management allows you to access and
manage the WDRT-1200AC easily. Launch the Web
browser and enter the default IP address
http://192.168.1.1
Step 2: When you enter into the Web User Interface, please
enter the User Name and Password in the login
window. The default User Name and Password are
both “admin”. Then click “Login” button to
continue.
Step 3: Enter the encryption key of the WDRT-1200AC if
necessary.
The above steps introduce simple installations and
configurations for the WDRT-1200AC. For further
configurations of Wireless Dual Band, WAN, LAN, Firewall,
Virtual Server, DMZ, and DDNS, please refer to the user
manual which you can download from the website.
http://www.planet.com.tw/en/support/download.php?type1=4&model=48557&type=3
If you have further questions, please
contact the local dealer or distributor where
you purchased this product.
3. Network Configuration (Windows 7)
1. Click “Start” button located in the lower-left corner of the
screen.
2. Click “Control Panel”.
3. Double-click “Network and Sharing Center” icon.
4. Click “Change Adapter Settings”.
5. Double-click “Local Area Connection” icon.
6. Select “Internet Protocol Version 4 (TCP/IPv4)” and
click “Properties” button.
7. Select “Obtain an IP address automatically” and
“Obtain DNS server address automatically”, and
then click “OK” button twice to save the configuration.
A computer with a wired Ethernet connection is required for the
first-time configuration of the Wireless Router.
Steps : Set your computer to get an IP address from the
Wireless Router:
Further Information
Ethernet Cable
Power
Power Adapter
Power
Power Adapter
Phone Jack
RJ-11
RJ-45
RJ-45
Cable/xDSL
Modem
001101010
WAN Port
LAN Ports