PLANET ANT-FP23A - Manual (Page 2)

Part No: 2011-E30240-000
Mounting Configuration
5GHz 23dBi Flat Panel Directional Antenna
Wall Mount
There are up/down and left/right tilting features for both vertical and horizontal polarization orientations.
Please make sure you have installed the ANT-FP23A of the same polarization with the other corresponding antenna of the outdoor AP.
1. M-Type Bracket (L) 1Pcs
2. Space Keeper 2Pcs
3. Spring Washer 6Pcs
4. M6-1.0 Nut 6Pcs
5. Steel Tube 93.5 mm 1Pcs
6. XHM8-1.25 x 120 1Pcs
7. M8 Spring Washer 3Pcs
8. M8 Washer 4Pcs
9. M8 Nut 1Pcs
10. Rotating Bracket 1Pcs
11. XHM8-1.25 x 20 2Pcs
12. Mounting Main Frame 1Pcs
13. Wall Tiger
4Pcs
14. TH 5/32-16 x 1" 4Pcs
15. M6 Washer 2Pcs
Vertical Polarization
Wall Mounting: Horizontal Polarization
Wall Mounting:
6
10
8
7
11
13 12 14
4 3
2
15
1 9
8
5
15
11
10
4
3
2
8
1
9
5
14 12 13
6
8
7
8
7
OUTDOOR INSTALLATION WARNING
IMPORTANT SAFETY PRECAUTIONS:
LIVES MAY BE AT RISK! Carefully observe these instructions and any special instructions that are included with the
equipment you are installing.
CONTACTING POWER LINES CAN BE LETHAL.
Make sure no power lines are anywhere where possible contact can be made.
Antennas, masts, towers, guy wires or cables may lean or fall and contact these
limes. People may be injured or killed if they are touching or holding any part of
equipment when it contacts electric lines. Make sure there is NO possibility that
equipment or personnel can come in contact directly or indirectly with power lines.
Assume all overhead lines are power lines.
The horizontal distance from a tower, mast or antenna to the nearest power line
should be at least twice the total length of the mast/antenna combination. This will
ensure that the mast will not contact power if it falls either during installation or
later.