PLANET VC-201A - Manual (Page 16)

16
2.1.2 LED Indicators for VC-204
The rich diagnostic LEDs on the front panel can provide the
operating status of individual port and whole system.
System n
LED Color Function
PWR Green
Light Power ON.
Off Power OFF.
VDSL n
LED Color Function
ACT Green
Light Indicate that the VDSL link is established.
Fast
Blink
Indicate that the VDSL link is at training status
(about 10 seconds).
Slow
Blink
Indicate that the VDSL link is at idle status.
Sync Green
Light Indicate that the VDSL link is established.
Fast
Blink
Indicate that the VDSL link is at training status
(about 10 seconds).
Slow
Blink
Indicate that the VDSL link is at idle status.
CO Green Light Indicate the VDSL Bridge is running at CO mode.
CPE Green Light Indicate the VDSL Bridge is running at CPE mode.
10/100Base-TX Port n
LED Color Function
LNK/
ACT
Green
Light Indicate that the port is link up.
Blink
Indicate that the Converter is actively sending or
receiving data over that port.
Off Indicate that the port is link down.