3 key features – PLANET VC-102M User Manual

Page 5

Note: Slave device must connect to Master device through the telephone

wire. Slave cannot connect to Slave and Master cannot connect to
Master. VC-102M works as Master device and VC-102S works as
Slave device.

1.3 Key Features

The converter provides the following key features:

• Cisco LRE switch / CPE compatible

• Complies with IEEE802.3, IEEE802.3u and IEEE802.3x standards

• 5 selectable transmission modes through DIP switch on VC-102M or manage-

ment interface of VC-1602

• QAM ( Quadrature Amplitude Modulation) line code

• Designed based on Frequency Division Duplex

• Half duplex Back pressure and IEEE802.3x Full Duplex Pause frame flow con-

trol

• Built-in POTS/ISDN splitter

• Two RJ-11 connectors for each VDSL port, one for VDSL connection and one for

POTS/ISDN connection

• Voice and data communication can be shared on the existing telephone wire

simultaneously

• Support up to 1536 bytes packet size, 802.1Q VLAN tag transparent

• Support extensive LED indicators for network diagnostics

This manual is related to the following products: