beautypg.com

2 mounting installation – PLANET IGT-1205AT User Manual

Page 23

background image

23

2.2 Mounting Installation

This section describes how to install the Industrial Gigabit Media
Converter and makes connections to it. Please read the following topics
and perform the procedures in the order being presented.

Note

In the installation steps below, this Manual uses
IGS-801 (PLANET 8 Port Industrial Gigabit Switch) as
the example. However, the steps for PLANET Industrial
Switch and Industrial Media Converter are similar.

2.2.1 Install DIN-Rail Mounting

The DIN-Rail is screwed on the Industrial Gigabit Media Converter when
out of factory. When replacing the wall mount application with DIN-Rail
application on Industrial Gigabit Media Converter is needed, please
refer to following figures to screw the DIN-Rail on the Industrial Gigabit
Media Converter. To hang the Industrial Gigabit Media Converter, follow
the following steps:

Step 1: Screw the DIN-Rail on the Industrial Gigabit Media Converter.