PLANET GT-70x Series - Manual (Page 2)

- 11 -
- 12 -
- 13 -
- 14 - -1 - - 2 -
9. CABLE CONNECTION PARAMETER
The wiring details are as below:
Cables:
Standard Fiber Type Cable Specification
1000Base-SX
(850nm)
Multi-mode 50/125μm or 62.5/125μm
1000Base-LX
(1300nm)
Multi-mode 50/125μm or 62.5/125μm
Single-mode 9/125μm
Wiring Distances:
Standard Fiber
Diameter
(micron)
Modal
Bandwidth
(MHz * km) Max.
Distance
(meters)
1000Base-SX MM
62.5
62.5
50
50 100
200
400
500 220
275
500
550
1000Base-LX
MM
62.5
50
50 5
4
5 550
SM 9 N/A 5000*
Note
The Single-mode port (1000Base-LX port) of
GT-702S, GT-705A, GT-706A15/B15 and GT-
706A60/B60 is complied with LX 5 kilometers
and provides additional margin allowing for a
10/15/60 kilometers Gigabit Ethernet link
on single mode fiber.
10. PRODUCT SPECIFICATION
The GT-70X comes with the following standard features:
Standards:
IEEE 802.3ab 1000Base-T
IEEE 802.3z 1000Base-SX/LX
Duplex Mode: Full Duplex Mode
Transfer rate 1000Mbps
Media Interface: RJ-45, SC, LC, single SC (WDM)
LED indicators: PWR, FDX, Fiber/LNK/ACT, TP/LNK/ACT
Cable
1000Base-T:
4 pair Cat. 5, EIA/TIA-568 100-ohm
screened twisted-pair (STP), up to 100m
1000Base-SX:
62.5/125μm multi-mode fiber optic
cable, up to 220m
50/125μm multi-mode fiber optic cable,
up to 550m
1000Base-LX:
9/125μm single-mode fiber optic cable,
up to 10km/15/60km
Dimensions 26 x 70 x 97mm (H x W x D)
Power External power adaptor 5V 2A max.
EMI
Compatibility:
FCC Class A, CE Certification Class A
Temperature:
Storage: -40°C ~ 70°C
Operating: 0°C ~ 50°C
Humidity: 5% ~ 90% non-condensing
Note
Connecting to the Gigabit Ethernet products,
please refer to the device’s Technical Manual.
1. PRODUCT FEATURES
● Comply with IEEE 802.3ab 1000Base-T, IEEE 802.3z
1000Base-SX/LX Ethernet standard
● Full-duplex supports for TP and fiber port
● Auto-negotiation on 1000Base-T port
● Auto-MDI/MDIX on TP port
● LED indicators for simple diagnostics and management
● Provides DIP switch to disable/enable auto-negotiation
by-pass function
● Compact in size, easy installation
● Can be installed on PLANET’s 10”/19” Media Converter
Chassis (MC-700/1000R/1500)
2. MODEL LIST
Your Gigabit Ethernet Converter comes with one of the
following models.
● GT-702: 1000Base-T to 1000Base-SX (SC)
● GT-702S: 1000Base-T to 1000Base-LX (SC)
● GT-705: 1000Base-T to 1000Base-SX (LC)
● GT-705A: 1000Base-T to 1000Base-SX/LX (SFP slot)
● GT-706A15: 1000Base-T to 1000Base-LX (WDM)
● GT-706B15: 1000Base-T to 1000Base-LX (WDM)
● GT-706A60: 1000Base-T to 1000Base-LX (WDM)
● GT-706B60: 1000Base-T to 1000Base-LX (WDM)
In the following sections, the term “GT-70X” indicates the
product family above, the term “MM” and “SM” represent
Multi-Mode and Single Mode fiber-optic mode.
Note
Please be noted, GT-706A15/706B15 and GT-
706A60/706B60 is designed to work in pairs.
It means you must connect GT-706A15 to GT-
706B15 or GT-706A60 to GT-706B60 directly,
i.e. Ann model to Bnn model. If both ends
are A or B models, or one end with any third
party device, they can’t work normally and
may damage the fiber connectors.