PLANET GST-702 - Manual (Page 4)

- 4 -
1. INTRODUCTION
1.1 Checklist
Thank you for purchasing PLANET 1000Base-T to 1000Base-LX/SX Smart Media Converter, the 1000Base-T to
1000Base-LX/SX Smart Media Converter package shall contain following contents:
Check the contents of your package for following parts:
z 1000Base-T to 1000Base-LX/SX Smart Media Converter x1
z User's manual CD x1
z DC 5V 2A Power Adapter x1
If any of these pieces are missing or damaged, please contact your dealer immediately, if possible, retain the carton
including the original packing material, and use them against to repack the product in case there is a need to return it to
us for repair.
1.2 About the 1000Base-T to 1000Base-LX/SX Smart Media Converter
The GST-70x series Smart Media Converter provide Media conversion between 1000Base-T and 1000Base-LX/SX in-
terfaces, such as multi-mode LC/SC connectors(220m/550m), single-mode LC/SC connector(10/20/40/50/70/120km) and
single fiber connector(WDM,15/60km) fiber connection options for various application.
The GST-70x series Smart Media Converter provide Auto MDI/MDI-X on its TP port and use the DIP switch from the
GST-70x to configure the available smart functions, such as the auto-negotiation / force for fiber interface and Link Pass
Through function(LLCF/LLR). The LLCF default set on board and work with LLR in diagnosing network connections, also
the LLR function can immediately alarm network administrator the media link issue and provide efficient solution to monitor
the entire network.
The GST-70x series Smart Media Converter can allow two type segments connect easily with efficiently and cost effective,
these Smart Media converter can be use us a standalone unit when it power on by it’s DC adapter. Or use as a slide-in
module to the PLANET new 19-inch Web Smart 16-Slots Media converter chassis (MC-1600MR/MC-1600MR48), with this
Web Smart Media converter chassis, the GST-70x able to manage and status monitor through the local RS-232 console
and remote web interface.
1.3 Features
◆
Complies with IEEE 802.3ab, 1000Base-T and IEEE 802.3z 1000Base-LX/SX Ethernet standard
◆
Provides one 1000Base-T port with RJ-45 connector, one 1000Base-LX/SX port with LC/SC/WDM connector
supporting multi-mode or single-mode fiber optic cable
◆
LED indicators for converter status
◆
Provide DIP switch to setting fiber ( Auto-negotiation / Manual) and LLR( Disable / Enable)
◆
Auto-MDI / MDI-X for 1000Base-T port
◆
Back-pressure & IEEE 802.3x compliant flow control and full wire-speed forwarding rate
◆
Link Loss Return( LLR) switch on each fiber optic to aid in troubleshooting remote network connections
◆
Link Loss Carry Forward( LLCF) work with LLR in diagnosing network connections
◆
Manageable through Web Smart Media Converter Chassis System
◆
Used as a stand-alone device or with a chassis for up to 16 converter with redundant power supply for optional
expansion use
◆
EMI standards complies with FCC, CE class B