PLANET FT-801 - Manual (Page 14)

10 11
Chapter 10
FT-80X Technical Specifications
The FT-80X comes with the following standard features:
· Standard: IEEE802.3/u, 10/100Base-TX and 100Base-
FX
· Connectors:
ð One RJ-45 (Auto-MDI/MDI-X) Twisted Pair, EIA568
ð One Fiber-optic, 1310nm wavelength (except: FT-
806A/FT-806B), connector-type vary with model
· Data Transfer Rate: 10/100Mbps (TP), 100Mbps (FX)
· Duplex mode support: Full or half-duplex mode by
Auto-Negotiation (TP)
· LED indicators: PWR, FX LNK/ACT, FX FDX/COL TP 100,
TP LNK/ACT, TP FDX/COL
· Power Requirement: 5V DC, 2A
· Ambient Temperature: 0° to 50°C (operating)
· Humidity: 5% to 90% (non-condensing)
· Dimension: 26 x 70 x 97mm (HxWxD)
· Cable:
ð UTP: Cat 5 UTP cable
ð Fiber: MM: 50/125 µm or 62.5/125 µm optic fiber
ð Fiber: SM: 8.3/125, 8.7/125, 9/125 µm optic fiber
Connecting to Router, Bridge, or Switch, Hub, please refer to the
device’s Technical Manual.