PLANET WNAP-3000PE - Manual (Page 7)

Web Configuration
WNAP-3000PE provides a user friendly interface for users to configure it via web
browser. Please follow the steps below to configure WNAP-3000PE basic settings.
1. The default value of WNAP-3000PE doesn’t enable DHCP server, please
double check obtain the IP from DHCP server in your network, otherwise,
please configure static IP address in your PC to an unused value in the range
192.168.0.1 ~ 192.168.0.254, with a Network Mask of 255.255.255.0.
2. Open your web browser and type WNAP-3000PE default IP address
http://192.168.0.228 into the “Address Field” of you web browser.
3. After enter the IP address and press Enter key, you can see the dialog box
appear as below, please enter the User name and Password. Then press “OK”.
User name: admin
Password: password