PLANET VC-205-KIT - Manual (Page 20)

20
Why can’t power be on when my PoE PD device is connected to
VC-205PR ?
CHECKPOINT:
1. Please check the cable type of the connection from VC-205PR to the
other end. The cable should be an 8-wire UTP, Category 5 or above,
and EIA568 cable within 100 meters. A cable with only 4-wire, short
loop or over 100 meters will affect the power supply.
2. Please check and assure the device is fully complied with IEEE
802.3af / IEEE 802.3at standard.