PLANET POE-161 - Manual (Page 21)

21
POE-161S, the Splitter Installation
1. Connect a standard network cable from “Ethernet+DC” port
of POE-161 to “PoE In” port of POE-161S. The POE LED of
POE-161S / POE-161 will light on continuance.
Switch
POE-161S POE-161
100 meters
Power
Data
Power
Data
PoE
Power Data
AC DC
PTZ Camera
1000Base-T UTP
PoE 1000Base-T UTP with PoE
Power Line (AC)
AC
DC Power Line (DC)
Warning
The POE-161S only accept IEEE 802.3at or IEEE
802.3af equipment; other in-line power device
may cause the POE-161S malfunction.
2. Connect the UTP cable in the package from “Ethernet” port
of POE-161S to the RJ-45 port of remote device.
3. Adjust proper DC power output and connect DC plug from
“DC OUT” of POE-161S to remote device.
Caution
Please ensure the output voltage is correct for
remote device. Otherwise, it will damage your
remote device.
4. Power on the remote device and its LED indicator will remains
on.