PLANET POE-152S - Manual

– 1 – – 2 –
– 3 – – 4 –
1. Package Content
Thank you for purchasing PLANET IEEE 802.3af PoE Splitter,
POE-152S. Terms of “802.3af PoE Splitter” in following
section of this User’s Manual means the POE-152S.
Upon open the box of the 802.3af PoE Splitter and carefully
unpack it. The box should contain the following items:
l The Power over Ethernet Splitter x 1
l User’s Manual x 1
l 15cm UTP straight network cable x 1
l DC Plug cable x 2
If any item is found missing or damaged, please contact
your local reseller for replacement.
2. Product Features
u Complies with IEEE 802.3af, PoE, IEEE 802.3/802.3u/
802.3ab 10/100/1000Base-T Ethernet standard
u Splits the 48V DC power over RJ-45 Ethernet cable into
different DC output
u LED indicators power input indication
u Distance up to 100 meters
u Two different output voltage options (5V/2A, 12V/1A)
u Auto-detect IEEE 802.3af PoE devices, protect devices
from being damaged by incorrect installation
u EIA568, category 5/5e/6, 2/4-pair cables for 10Base-T or
100Base-TX and 1000Base-T
3. Product Specification
Model POE-152S
Standard
IEEE 802.3af, IEEE 802.3,
IEEE 802.3u, IEEE 802.3ab
10/100/1000Base-T
Ethernet Connector
2 x RJ-45
(1 for Data + DC in, 1 for Data out)
Data Rate
10/100/1000Mbps
(vary on Ethernet device attached)
DIP Switch 5VDC / 12VDC output voltage
Number of Device
can be powered
1
Ethernet Cable TIA/EIA-568, Category 5/5e/6 cable
LED Indicator 1 x PoE ready/in-use
Operating
Environment
0~50 Degree C, 5%~90%RH
Storage Environment -10~70 Degree C, 5%~90%RH
Dimension
(W x D x H)
73 x 55 x 24 mm
Weight 50g
Emission FCC Class A, CE mark
Standard Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3af Power over Ethernet
4. Product Outlook
Figure 1 shows a front panel of 802.3af PoE Splitter.
Figure 1: POE-152S Outlook
LED Indicators
LED Color Function
PoE ready /
in-use
Green
Lights to indicate the port is
providing 48VDC in-line power.
5. Installation
If your network environment is very difficult to find a
power socket for your AC-DC Adapter of networked device,
the POE-152S provide DC power for this Ethernet Device
conveniently and easily.
The POE-152S separates the power out and provide two
kind of DC power output through its DIP switch and its
voltage and current shown as below:
- 5V DC / 2A
- 12V DC / 1A
The default value will be set on 5V.
Hint
Please check the power requirement of the
device that is going to get the power from
POE-152S. If the power requirement is higher
than POE-152S can supply, current overload
will shutdown the POE-152S itself. Thus, it will
shutdown your device as well.
"PLANET POE-152" and POE-152S can be installed in pair.
However, use of third-party device is allowed if the device
complied with IEEE 802.3af standard.