PLANET POE-152 - Manual

– 1 – – 2 –
– 3 – – 4 –
1. Introduction
1.1 Packet Contents
Thank you for purchasing our POE-152 IEEE 802.3af Power
over Ethernet Injector, your Power over Ethernet Injector
package shall contains following contents:
Check the contents of your package for following parts:
• Power over Ethernet Injector x 1
• User's manual x 1
• Power Adapter x 1
• Power cord x 1
If any of these pieces are missing or damaged, please
contact your dealer immediately, if possible, retain the
carton including the original packing material, and use them
against to repack the product in case there is a need to
return it to us for repair.
1.2 Key Features
• Comply with IEEE 802.3af Power over Ethernet, IEEE
802.3 / 802.3u 10/100Base-TX / 802.3ab 1000Base-T
• Provide DC 48V power over RJ-45 Ethernet cable to
device with Ethernet port
• Auto-detect of PoE IEEE 802.3af equipment, protect
devices from being damaged by incorrect installation
• Work with EIA568, category 5, 4-pair cables for 10Base-T
or 100Base-TX and 1000Base-T
1.4 Product Outlook
LED definition:
LED Color Function
Power Yellow
Lights to indicate that the POE-152
has power
PoE ready /
in-use
Green
Lights to indicate the port is
providing 48VDC in-line power
1.3 Specification
Model POE-152
Ethernet
Connector 2 x RJ-45
(1 for data + DC in, 1 for Data out)
Ethernet Data rate
10/100/1000Mbps
(vary on Ethernet device attached)
Input voltage DC 48V, 0.4A
Number of device
can be powered
1
Ethernet cable TIA/EIA-568, Category 5/5e/6 cable
LED indicator 1 x power, 1 x PoE ready / in-use
Dimension
(W x D x H)
73 x 55 x 24 mm
EMI FCC Class B, CE mark
Standard
Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3af Power over Ethernet
(PSE)
RJ-45 Power
Insertion Pair
Pair 1, 2, 3, 6 (End-Span)
2. Hardware Installation
This product provides three different running speeds
– 10Mbps, 100Mbps and 1000Mbps in the same device
and auto-matically distinguishes the speed of incoming
connection.
This section describes the hardware features of POE-152.
Before connecting any network device to the POE-152, read
this chapter carefully.
2.1 Before Installation
Before your installation, it is recommended to check your
network environment. If there is any IEEE 802.3af devices
need to power on, the POE-152 can provide you a way
to supply power for this Ethernet device conveniently and
easily. The POE-152 equips with an AC-DC adapter with
DC 48V input and injects this DC power into the pin of the
twisted pair cable (pair 1, 2 and pair 3, 6).
If there is very difficult to find a power socket for AC-DC
Adapter of your non IEEE 802.3af networked device, the
POE-152 and POE-152S can provide you a way to supply
DC power for this Ethernet device conveniently and easily.
Note
The POE-152 and POE-152S can be installed
in pair. However, the use of third-party device
is allowed if the device complied with IEEE
802.3af standard.