Physical installation – PLANET ICA-HM620 User Manual
Page 4

4
Physical Installation
Caution
1. During the installation, please take care and avoid crash. That
may cause the device damage or cause injury of the installer.
2. Please make sure the hardware had been located on the wall
properly. If the hardware drops down, it is possible make
someone injury or hurt. Please check the hardware again after
the installation.
3. Please according to the practical local power voltage to adjust
the power switch. The wrong input voltage may cause the device
damage.
Step 1
Unpack the Dome Camera’s package and take out the Dome Camera unit.
Step 2
Tighten the knob to remove the cover dome and the lens protector.