PLANET ICA-HM126 User Manual
Quick guide

ICA-HM126
ICA-HM126R
ICA-HM126
ICA-HM126R
their respective owners. Copyright © 2010 PLANET Technology Corp. All rights reserved.
PLANET Technology Corporation
11F, No. 96, Min Chuan Road, Hsin Tien, Taipei, Taiwan, R.O.C.
Tel: 886-2-2219-9518
Fax: 886-2-2219-9528
Email: [email protected]
www.planet.com.tw
Quick Guide
Quick Guide
2011-AB5400-000
VERIFY THE CONTENTS INSIDE PACKAGE BOX
The package should contain the items plus ICA-HM126 / ICA-HM126R. If any item is missing or damaged, please contact the seller immediately.
Quick Installation Guide
Step 2a : Connecting Network
Step 3 : Computer Network Setup
Set your computer’s IP address to 192.168.0.x, where x is a number between 1 to 253
(except 20 where is being used for the camera by default). If you don’t know how to do
this, please ask your network administrator.
In the ICA-HM126 / ICA-HM126R can be configured without external power, if connecting to an IEEE powered Ethernet switch.
Fasten the Lens with IP Camera
NOTE : Use only the power adapter shipped with the unit to ensure correct functionality
Use web browser (Internet Explorer 6.0 or above) to connect to
192.168.0.20 (type this
address in the address bar of web browser).
You’ll be prompted to input user name and password:
admin / null (without password).
Further Configuration
For detail configuration, please check user’s manual on the bundled CD.
If you have any other questions, please contact the dealer where you purchased this product or you can contact PLANET directly at the following
email address: [email protected]
Step 4 : Login Prompt
Power Adapter
Focus Adjuster
Lens
ICA-HM126/HM126R
Ethernet Switch
User PC
(192.168.0.X)
Step 1. Connecting Lens
CD-ROM
Camera Rear Panel
Step 2b : Connecting Power via PoE interface and Network
ICA-HM126/HM126R
Ethernet PoE Switch
User PC
(192.168.0.X)
5. Auto Iris Connector
6. Line In / Line Out
8. RJ-45 LAN Socket
1. Video Out Connector
2. DI / DO Connector
3. Reset Button
4. Power Connector
7. Mirco SD Card slot
Item
Description
1. Video Out Connector The internet camera also provides composite video output. User can use BNC video cable to connect the
internet camera with a TV monitor or VCR.
2. DI / DO Connector
Connect connects to external sensor in and alarm out devices.
3. Reset Button
Restore to default setting, press the button with a proper tool.
4. Power Connector
The input power is 12V DC.
Note: ONLY use package power adapter supplied with the product. Otherwise, the product may be damaged.
5. Auto Iris Connector
The connector can drive CCTV auto iris lens.
6. Line In / Line Out
Connect a microphone / speaker to the network camera.
7. Micro-SD Card slot
For video and snapshots storage.
8. RJ-45 LAN Socket
The LAN socket is a RJ-45 connector for connections to 10/100Base-TX Fast Ethernet cabling. The LAN socket
is compliant with IEEE802.3af standard PoE and IP Camera is necessary supplied power through PoE
Switch/Hub device.
Pin
Function
1
Output +
2
Output -
3
Input +
4
Input -