PLANET ICA-750 - Manual (Page 6)

3.2 Rear Panel
Reset
LAN (PoE)
PWR AUDIO
IN
AUDIO
OUT
DI / DO
I/O Info
PORT PORT Description
Reset
Reset to manufacturer default valued and reboot.
When pressed and held over 10 seconds, the settings of IP
Camera will be set to the default values.
Upon completion, the PWE LED will blink three times.
LAN (PoE)
Connect your Camera to a 10/100Base-TX hub or switch. It
is compliant with IEEE802.3af standard PoE. Both mid-span &
end-span can be used.
PWR
Connect to the supplied power adapter 12V DC, 1A. When this
device is obtaining power from PoE already, you don’t have to
attach the power adapter to ICA-750.
DI / DO The terminal block includes 2 input ports and 2 output ports.
AUDIO IN
An external microphone can be plugged in. That will disable the
built-in microphone on the front panel.
AUDIO OUT An external speaker can be plugged in.