Chapter 2. hardware interface, 1 physical descriptions, 1 identification of ica-5150 physical details – PLANET ICA-5150 User Manual
Page 11
Ultra-mini HD Vandal Dome IP Camera
ICA-5150
11
Chapter 2. Hardware Interface
2.1 Physical Descriptions
2.1.1 Identification of ICA-5150 physical details
Interface
Description
Lens
User could adjust the angle of the lens manually.
Micro-SD
User can insert a micro SD card into this slot for event recording.
Factory Default Reset
This button is used to restore all the factory default settings.
Sometimes restarting the device will make the system back to a
normal state. However, if the system still got problems after
restart, user can restore the factory default settings and configure
it again.
Steps:
1.Turn off the Camera first.
2. Press and hold this button continuously.
3. Power on this camera.
4. Wait until orange LED is on. Once the Camera begins to
operate again, the device has been restored to default settings.
Note: After resetting to default, please login the camera using the
default IP (rname (admin) and