PLANET ICA-4210P - Manual (Page 14)

60fps Full HD IR IP Camera with Remote Focus and Zoom
ICA-4210P
2.1.2 I/O Control Instruction
Descriptions for I/O cable set:
Interface Description
DC Power
The input power is DC 12V, 1A.
ONLY use package power adapter supplied with
the internet. Otherwise, the product may be
damaged.
RJ45
(LAN socket, PoE )
Connecting to PC or Hub/Switch.
For connection to 10Base-T Ethernet or 100Base-TX or
1000Base-T Fast Ethernet cabling, this Ethernet port built
auto-negotiation protocol can detect or negotiate the
transmission speed of the network automatically. Please
use CAT-5 cable to connect the Network Camera to a
1000Mbps Fast Ethernet network switch or hub.
ONLY use one power source, either from DC or
from 802.3af Power over Ethernet.
Audio Output
(Green, Line Out)
Connecting a loud speaker to the IP Camera. This is for
voice alerting and two-way audio.
Microphone Input
(Pink, Audio In)
Connect a microphone to the IP Camera.
Reset
(Factory Default)
This button is used to restore all the factory default settings.
DI/DO, RS-485
The 6 pin terminal block includes 1 input port and 1 output
port, and RS-485 D+ and D-.