PLANET ICA-4130S - Manual (Page 27)

Ultra-mini SIP PoE IP Camera
ICA-4130S/ICA-4230S
To use this function, the settings on SIP page must be configured properly.
1. Before using the SIP, you need to register an account for the camera from the SIP server;
2. Register another user account for the SIP device from the same SIP server;
3. Call the camera User ID from the SIP device; you will get the video on the SIP device.
Parameter Description
Unregistered SIP registration status. Display “Unregistered” or “Registered”
Enable Start or stop using SIP
Register Status
Choose to use Enable mode or Disable mode. Enable mode
means to use with a registered account. Disable mode refers to
SIP without a registered account; just use the IP address to call.
User ID SIP username, or telephone number from ITSP
Password SIP account password
User Name SIP account name
Server IP FQDN or IP of SIP server from VoIP service provider.(IPPBX)
Server Port The default server port is 5060
Enable Audio in SIP
Call
Start or stop using Audio
27