PLANET ICA-3150 - Manual (Page 33)

ICA-3150
Device Time
Setting
Displays the date and time of the device.
Synchronize with PC:
Click this option to enable time synchronization with PC time.
Manual Setting:
Click this option to set time and date manually.
Manual Setting: Click this option to set time and date manually.
Adjust
Synchronize
with NTP:
Click this option if you want to synchronize the
device’s date and time with those of time server
called NTP server (Network Time Protocol).
Time Zone
Set the time difference from Greenwich Mean Time in the area
where the device is installed.
Timing Address Enter the NTP server IP address manually.
3.6.2 Motion Detection
Use this menu to specify motion detection window 1 to window 4 and set the conditions for
detection while observing a captured image.
Alarm Enable To enable or disable the Alarm service here.
Sensitivity
Define the sensitivity value of motion detection. The higher value will
be more sensitivity.
Alarm Duration (S)
For example, if you select "10 sec" here, once the motion is detected
and action is triggered, it cannot be triggered again within 10
seconds.
- 33 -
720P IR Bullet PoE IP Camera