PLANET ICA-230 - Manual (Page 10)

10
Chapter 4. IP Wizard
This chapter shows how to quick set up your PT Internet Camera. The PT Internet
Camera is with the default settings. However to help you find the networked
camera quickly the windows utility-IPWizard can search the cameras in the network
that shall help you to configure some basic setting before you started advanced
management and monitoring.
4.1 Installation
Note
In the installation steps below, this guide use ICA-M230 as the
example. However, the steps for ICA-501 & ICA-230 are similar.
1. Insert the bundled CD into the CD-ROM drive to launch the autorun program.
Once completed, a welcome menu screen will appear.
2. Click the “IPWizard” hyperlink, you will see the InstallShield Wizard dialog box as
below.
Note
If the welcome screen does not appear, click “Start” at the taskbar.
Then, select “Run” and type “D:\Utility\setup.exe”, assume D is
your CD-ROM drive.
3. The “Welcome to the InstallShield Wizard for IPWizard” will display on the screen
and click “Next” to continue.