PLANET ICA-107P - Manual (Page 23)

2
Input the password (default: admin) and click OK to configure the
camera’s network and security setting:
In Lan Setting page, user can configure camera’s network settings.
Select DHCP to set the camera to obtain an IP address from DHCP
server on local area network automatically, and select Manual IP to
input the IP address information manually. Click OK to save settings.
In Security’ page, user can change the camera’s name and password
(user name is always ‘admin’ and cannot be changed). You have to
input the same password in both New Password and Confirm
Password field, or you’ll be prompted to input new password again.
Click OK to save settings or click Cancel to discard changes.