Customer support, Hpoe-2400g – PLANET HPOE-1200G User Manual

Page 2

– 5 –

– 6 –

4. When IP Address has been changed

or password has been forgotten

To reset the IP address to the default IP Address
“192.168.0.100” and the user name / password to factory
default mode, press the hardware reset button for about
8 seconds. After the device is rebooted, you can login the
management Web interface within the same subnet of
192.168.0.xx and default user name / password.

PoE In-Use

HPOE-2400G

RESET

PoE 1

Fail
FAN1

Fail

PoE 2

Fail
FAN2

Fail

SYS PWR

Management

Hardware

Reset button

5. Customer Support

Thank you for purchasing PLANET products. You can browse
our online FAQ resource at the PLANET Web site first to
check if it could solve your issue. If your need more support
information, please contact PLANET switch support team.

PLANET online FAQ:
http://www.planet.com.tw/en/support/faq.php?type=2

Switch support team mail address:
[email protected]

Contents are subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp.

All other trademarks belong to their respective owners.

This manual is related to the following products:

HPOE-2400G