PLANET EPN-402NV - Manual

Note
– 1 – – 2 –
– 3 – – 4 –
1. Package Contents
2. Hardware Installation
– 7 – – 8 –
5. Wireless Network Connection
4. Enter into the Web Management
– 5 – – 6 –
GEPON Wi-Fi ONU
12V / 1A Power Adapter
You have already finished the configuration of the
EPN-402NV. Now you can use your iPhone, iPad, laptop, and
any other Wi-Fi device to connect with it wirelessly and start
surfing the Internet.
2011-BA0110-000
Thank you for choosing PLANET EPN-402NV. Before installing
the router, please verify the following items in the package box.
If there is any item missing or damaged, please
contact the seller immediately.
Step 2: Follow the figure below to connect the network
devices.
Step 1: Connect the Power Adapter provided in the package
to the EPN-402NV. The Power LED on the front
panel will turn on accordingly.
Step 3: After you enter into the Web User Interface, please
follow the indications on the screen to quickly set
up the Internet connection.
Default IP Address: 192.168.1.1
Default User Name: admin
Default Password: admin
Default SSID: EPN-402NV
SSID2: iTV-402NV
Default Wireless Encryption Type: 12345678
Step 2: Highlight the wireless network (SSID) to connect
and click [Connect] button.
Step 1: Right-click on the network icon displayed in the
system tray.
Quick Guide
EPN-402NV
Quick Installation Guide
GEPON Wi-Fi ONU
Step 1: The Web management allows you to access and
manage the EPN-402NV easily. Launch the Web
browser and enter the default IP address
http://192.168.1.1
Step 2: When you enter into the Web User Interface, please
enter the User Name and Password in the login
window. The default User Name and Password are
both “admin”. Then click “Login” button to
continue.
Step 3: Enter the encryption key of the EPN-402NV.
The above steps introduce simple installations and
configurations for the EPN-402NV. For further configurations
of WAN, LAN, Firewall, VoIP, DMZ, and DDNS, please refer
to the user manual which you can download from the
website.
http://www.planet.com.tw/en/support/download.php?type
1=22824&model=48570&type=3
If you have further questions, please
contact the local dealer or distributor where
you purchased this product.
3. Network Configuration (Windows 7)
1. Click “Start” button located in the lower-left corner of the
screen.
2. Click “Control Panel”.
3. Double-click “Network and Sharing Center” icon.
4. Click “Change Adapter Settings”.
5. Double-click “Local Area Connection” icon.
6. Select “Internal Protocol Version 4 (TCP/IPv4)” and
click “Properties” button.
7. Select “Obtain an IP address automatically” and
“Obtain DNS server address automatically”, and
then click “OK” button twice to save the configuration.
A computer with a wired Ethernet connection is required for the
first-time configuration of the Wireless Router.
Steps : Set your computer to get an IP address from the
Wireless Router:
Further Information
Ethernet Cable
Power
Power
RJ45
PC/Laptop
OLT/
Splitter
Fiber