PLANET XGSW-28040 - Manual (Page 6)

6
4. Logon to the Console
Once the terminal has connected to the device, power on the XGSW Managed
Switch, the terminal will display that it is running testing procedures.
Then, the following message asks the login username and password. The factory
default username and password as following and the login screen in Figure 4-1
appears.
Username: admin
Password: admin
Figure 4-1 XGSW Managed Switch Console Login screen
Note
1. For security reason, please change and memorize the
new password after this first setup.
2. Only accept command in lowercase letter under console
interface.