Set 100base-fx for sfp port – PLANET XGS3-24042 User Manual

Page 12

Text mode
Original mode

9. Set 100Base-FX for SFP Port

The XGS3 Managed Switch supports both 1000Base-X and 100Base-FX SFP
transceiver by manual setting and the default SFP port speed is set to 1000Mbps.
To establish the fiber connection with 100Base-FX SFP transceiver, the following
command configuration is required:

XGS3-24042#config
XGS3-24042(config)#interface ethernet 1/0/21-24
XGS3-24042(config-if-port-range)#speed-duplex force100-fx

Figure 9-1 Set 100Base-FX screen

This manual is related to the following products:

XGS3-24242