PLANET WGSW-2620HP - Manual (Page 11)

11
7. While IP Address be changed or forgotten admin
password –
To reset the IP address to the default IP Address “192.168.0.100” and the user
name / password to factory default mode (default user name and password are
both admin). Press the hardware reset button at the front panel about 5 seconds.
After the device is rebooted, you can login the management Web interface within
the same subnet of 192.168.0.xx and default user name / password. Be noted, all
the previous setup will disappeared after factory reset.
Hardware Reset
57600, N, 8, 1
Console
24-Port 10/100Mbps + 2 Gigabit
Managed
802.3at PoE Switch
WGSW-2620HP
PWR RESET
2 6 10 14 18 22 4 8 12 16 20 24
1 5 9 13 17 21 3 7 11 15 19 23
ACT LNK PoE In-Use
SYS