PLANET WGS-803 - Manual (Page 2)

- 9 -
- 10 -
- 11 -
- 12 -
3.2 DIN-rail Mounting Installation
The DIN-rail is screwed on the WGS-803 when out
of factory. When the wall mount application for the
WGS-803 needs to be replaced with DIN-rail application,
please refer to the following figures to screw the
DIN-rail on the WGS-803. To hang up the WGS-803,
follow the steps below
Step 1: Screw the DIN-rail on the WGS-803
3.3 Magnet Installation
To install the WGS-803 on a magnetic surface, simply
follow the following diagram
Step 2: Lightly insert the button of DIN-rail into the
track
1 Push
2 Click
Step 3: Check whether the DIN-rail is tightly on the
track
4. Customer Support
Thank you for purchasing PLANET products. You can
browse our online FAQ resource and User’s Manual on
PLANET Web site first to check if it could solve your
issue. If you need more support information, please
contact PLANET switch support team.
PLANET online FAQ:
http://www.planet.com.tw/en/support/faq.php?type=1
Switch support team mail address:
[email protected]
Copyright © PLANET Technology Corp. 2015.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All
other trademarks belong to their respective owners.
PLANET TECHNOLOGY CORPORATION
e-mail: [email protected] http://www.planet.com.tw
10F., No.96, Minquan Rd., Xindian Dist., New Taipei City, Taiwan, R.O.C. Tel:886-2-2219-9518 Fax:886-2-2219-9528
EC Declaration of Conformity
For the following equipment:
*Type of Product: Industrial 8-Port 10/100/1000T Wall-mount Switch
*Model Number: WGS-803
* Produced by:
Manufacturer‘s Name : Planet Technology Corp.
Manufacturer‘s Address: 10F., No.96, Minquan Rd., Xindian Dist.,
New Taipei City 231, Taiwan (R.O.C.)
is herewith confirmed to comply with the requirements set out in the Council Directive on the
Approximation of the Laws of the Member States relating to Electromagnetic Compatibility Directive
on (2004/108/EC).
For the evaluation regarding the EMC, the following standards were applied:
EN 55022 (2010)
EN 61000-3-2 (2006 + A2:2009)
EN 61000-3-3 (2008)
EN 55024 (2010)
EN 61000-4-2 (2009)
EN 61000-4-3 (2006 + A2:2010)
EN 61000-4-4 (2012)
EN 61000-4-5 (2006)
EN 61000-4-6 (2009)
EN 61000-4-8 (2010)
EN 61000-4-11 (2004)
Responsible for marking this declaration if the:

Manufacturer  Authorized representative established within the EU
Authorized representative established within the EU (if applicable):
Company Name:
Planet Technology Corp.
Company Address: 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
Person responsible for making this declaration
Name, Surname
Kent Kang
Position / Title : Product Manager
Taiwan 28 th April, 2015
Place Date Legal Signature