PLANET GSD-1020S - Manual (Page 9)

9
5. Recovering Back to Default Configuration

IP Address has been changed or admin password has been
forgotten –
To reset the IP address to the default IP Address “192.168.0.100” or reset the
login password to default value, press the hardware reset button on the front
panel for about 10 seconds. After the device is rebooted, you can login the
management WEB interface within the same subnet of 192.168.0.xx.
1 3 5 7
2 4 6 8
9
10
100/1000X SFP
PWR RESET
ACT LNK
1000
ACT LNK
1000 GSD-1020S
10-Port Gigabit
Managed Switch
2
1
4
3
6
5
8
7
10
9
Figure 5-1: GSD-1020S Reset Button