PLANET FSD-808P - Manual (Page 12)

12
Step 2: Attach a rack-mount bracket to each side of the Switch with supplied
screws attached to the package. Figure 3-2 shows how to attach brackets
to one side of the Switch.
Figure 3-2: Attaching the Brackets to the Switch.
Note
You must use the screws supplied with the mounting brackets.
Damage caused to the parts by using incorrect screws would invali-
date the warranty.
Step 3: Secure the brackets tightly.
Step 4: Follow the same steps to attach the second bracket to the opposite side.
Step 5: After the brackets are attached to the Switch, use suitable screws to
securely attach the brackets to the rack, as shown in Figure 3-3.
Figure 3-3: Mounting the Switch in a Rack
Step 6: Proceed with Steps 4 and 5 under session 3.1 Desktop Installation to
connect the network cabling and supply power to your Switch.