PLANET FGSW-4840S User Manual

Page 28

User’s Manual of FGSW-4840S

The Tag VLAN setting page is affected by the global setting of the ports, the screen in Figure 3-26 appears. It contains the
following fields:

Figure 3-26 Tag VLAN Setting screen

Note

If any Trunk has been set, the Trunk can be configured, but member ports of the Trunk is not
able to be configured and in the field it display the parameters of the Trunk they belong to.

Object

Description

VLAN

The VLAN number. Select the number of the VLAN you want to configure here.

VLAN ID

Configure the VLAN ID.

Port

The switch port number.

Member

Select the member of the VLAN here. If this field is checked, it indicates the port belongs to the
current VLAN.

Egress Frame

The solution to the egress frame. “Drop Tag" indicates drop the tag header before sending the frame.
“Add Tag" indicates add the tag header before sending the frame. "Unmodify" indicates do not
modify the tag header before sending the frame.

All Ports

By operating on this field expediently, you can set the values of all ports in the corresponding field.

ALL VLAN

Displays all defined VLANs.

Select All

Select all ports to be the VLAN members.

Clean Up

Clean up all members of the VLAN.

Submit

Submit to buildup a VLAN with the selected members.