Recovering back to default configuration, Customer support – PLANET FGSW-4840S User Manual
Page 2
– 5 –
– 6 –
Now, you can use the Web management interface to
continue the Switch management. Please refer to the user’s
manual for more.
4. Recovering Back to Default
Configuration
IP Address has been changed or admin password
has been forgotten –
To reset the IP address to the default IP Address
“192.168.0.100” or reset the login password to default
value, press the reset button on the front panel for about
5 seconds. After the device is rebooted, you can login
the Web interface management within the same subnet of
192.168.0.xx.
PWR
SYS
Reset
1
2
3
4
5
6
7
8
9
10
11
12
1
3
5
7
9
11
2
4
6
8
10
12
ACT
100
LNK
ACT
10
LNK
Figure 4-1: FGSW-4840S Reset Button
5. Customer Support
Thank you for purchasing PLANET products. You can browse
our online FAQ resource and User’s Manual on PLANET Web
site first to check if it could solve your issue. If you need
more support information, please contact PLANET switch
support team.
PLANET online FAQ:
Switch support team mail address:
[email protected]
FGSW-4840S User’s Manual:
Copyright © PLANET Technology Corp. 2014.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other
trademarks belong to their respective owners.