PLANET FGSW-2402S - Manual (Page 14)

PLANET Switch series 8
2.1.1 LED indictor for whole switch
There are two LEDs for whole switch system.
PWR Green Lit: power on
READY Green Lit: CPU initial completed
2.1.2 LED indictor for 10/100Base-TX port
Each 10/100Base-TX port has three LED indicators.
LNK/ACT Green Lit: port has established a valid
network connection.
Blink: traffic is passing through the port
100Mbps Green Lit: connected on 100M speed.
Lit off: connected on 10M speed
FDX/
COL
Yellow
Lit: Full-Duplex
Blink: Half-Duplex/ Collision
Off: Half-duplex or not connected
2.1.3 LED indictor for modules
There are six LED indicators for modules of
FGSW-2402S. These modules have different LED
definition when different module installed.
SGSW-A1GT 10/100/1000Base-T modules
1000 Green Lit: indicate link status and connected
on 1000Mbps
100 Green Lit: indicate link status and connected on
100Mbps
10 (FX) Green Lit: indicate link status and connected on
10Mbps
FDX/COL Green Lit: Full-Duplex
Blink: Half-Duplex/ Collision
Off: Half-duplex or not connected
TX Green Lit: indicate data transmitting status
RX Green Lit: indicate data receiving status