Starting web management – PLANET XGSW-28040HP User Manual
Page 9
9
6. Starting Web Management
The following shows how to start up the Web Management of the Managed
Switch. Note the Managed Switch is configured through an Ethernet connection.
Please make sure the manager PC must be set on the same IP subnet address.
For example, the default IP address of the Managed Switch is 192.168.0.100,
then the manager PC should be set at 192.168.0.x (where x is a number
between 1 and 254, except 100), and the default subnet mask is 255.255.255.0.
PC / Workstation with
IE Browser
192.168.0.X
RJ-45/UTP-Cable
Managed Switch
IP Address:
192.168.0.100
Figure 6-1: IP Management Diagram
This manual is related to the following products: