beautypg.com

7 technical support, 7technical support – Avago Technologies SAS 9300-4i Host Bus Adapter User Manual

Page 8

background image

LSI Corporation

- 8 -

LSI SAS 9300-4i PCI Express to 12Gb/s SAS Host Bus Adapter User Guide

December 2013

Technical Support

LSI 12Gb/s SAS HBA Certifications and Safety Characteristics

NOTE

The shape, size, and locations of the components on your HBA and its
bracket might vary from this illustration. The HBA requires a x8
PCIe slot.

Figure 2 Install an LSI 12Gb/s x8 HBA in a PCIe Slot

6.

Secure the HBA bracket to the system’s chassis. Install the bracket screw, if applicable, or engage the system
retention mechanism to secure the HBA to the system’s chassis.

7.

Connect SAS cables between the HBA and the SAS enclosure that contains SATA or SAS devices. The LSI
12Gb/s SAS HBA has one SFF-8644, external x4 mini-SAS HD connector. Use a cable with an external mini-SAS HD
connector (SFF-8644) on one end (to connect to the HBA) and the appropriate connector to attach to the
enclosure that contains SAS or SATA devices on the other end.

8.

Replace the cover and any power cords, and power up the system. Replace the chassis’s cover, reconnect any
power cords, and reconnect any network cables. Turn on the power.

The hardware installation of your LSI 12Gb/s SAS HBA is complete.

7

Technical Support

For assistance installing, configuring, or running the LSI 12Gb/s SAS HBA, contact LSI Technical Support:

E-mail:

[email protected]

Phone:

1-800-633-4545 (North America)

00-800-5745-6442 (International)

Website:

www.lsi.com/support

"RACKET
3CREW

0RESS
(ERE

0RESS
(ERE

?

%DGE

0#)

"IT

"IT

3&&