Avago Technologies SAS 9300-4i Host Bus Adapter - Manual (Page 6)

LSI Corporation
- 6 -
LSI SAS 9300-4i PCI Express to 12Gb/s SAS Host Bus Adapter User Guide 
December 2013
LSI SAS 9300-4i HBA Characteristics
Physical Characteristics
SATA+SAS Connector (J1). The LSI 12Gb/s SAS HBA supports a SATA and SAS connector through an SFF-8643
mini-SAS HD, internal connector.
5.4 Physical Characteristics
The LSI 12Gb/s SAS HBA is a 6.0-in. × 2.7-in., low-profile board. The component height on the top and bottom of the
LSI 12Gb/s SAS HBA is in accordance with the PCIe specification. The following figure shows the HBA board layout.
Figure 1 LSI SAS 9300-4i HBA Board Layout
 EC1 – PCIe x8 board edge connector
 CR1 – Heartbeat LED
 J1 – SFF-8643 mini-SAS HD, internal, right-angle connector
5.5 Electrical Characteristics
The maximum power requirements for the LSI SAS HBA under normal operation are as follows:
 PCIe 12.0 V = 1.46 A
 Power values:
— Nominal = 10.2 W
— Worst case = 17.5 W
5.6 Thermal and Atmospheric Limits
The atmospheric limits for the LSI 12Gb/s SAS HBA are as follows:
 Temperature range: 0 °C to 55 °C (32 °F to 131 °F) (dry bulb)
 Relative humidity range: 5% to 90% noncondensing
 Maximum dew point temperature: 32 °C (89.6 °F)
 Minimum airflow: 200 linear feet per minute
%#
#2
*
?
,3)