8 technical support, 8technical support – Avago Technologies SAS 9300-16i Host Bus Adapter User Manual
Page 8
Avago Technologies
- 8 -
LSI SAS 9300-16i PCI Express to 12Gb/s SAS Host Bus Adapter User Guide
August 2014
Technical Support
Figure 2 Install an LSI 12Gb/s x8 HBA in a PCIe Slot
NOTE
The shape, size, and locations of the components on your HBA and its
bracket might vary from this illustration. The HBA requires a x8
PCIe slot.
5.
Secure the HBA bracket to the system’s chassis. Install the bracket screw, if applicable, or engage the system
retention mechanism to secure the HBA to the system’s chassis.
6.
Connect the auxiliary power cable to the LSI SAS 12Gb/s SAS HBA if auxiliary power is required with your
system design.
7.
Connect SAS cables between the HBA and the SAS backplane or any other SATA or SAS device. The LSI
12Gb/s SAS HBA has four SFF-8643, internal x4, mini-SAS HD connectors. Use cables with an internal mini-SAS HD
connector on one end (to connect to the HBA) and the appropriate connector on the other end to attach to the
backplane or SAS/SATA devices.
8.
Replace the cover and any power cords, and power up the system. Replace the chassis’s cover, reconnect any
power cords, and reconnect any network cables. Turn on the power.
The hardware installation of your LSI 12Gb/s SAS HBA is complete.
8
Technical Support
For assistance installing, configuring, or running the LSI 12Gb/s SAS HBA, contact LSI Technical Support:
E-mail:
Phone:
1-800-633-4545 (North America)
00-800-5745-6442 (International)
Website:
?
%DGE
0#)E
0RESS
(ERE
0RESS
(ERE
"RACKET