Avago Technologies SAS 9300-16i Host Bus Adapter - Manual (Page 6)

Avago Technologies
- 6 -
LSI SAS 9300-16i PCI Express to 12Gb/s SAS Host Bus Adapter User Guide
August 2014 LSI SAS 9300-16i HBA Characteristics
5.4 Physical Characteristics
The LSI 12Gb/s SAS HBA is a 6.1-in. × 4.4-in board. The component height on the top and bottom of the LSI 12Gb/s
SAS HBA is in accordance with the PCIe specification. The following figure shows the HBA board layout.
Figure 1 LSI SAS 9300-16i HBA Board Layout
 J12 – PCIe x8 board edge connector
 LED1, LED2 – Heartbeat LEDs
 J10 – Auxiliary power connector
 J7 – SFF-8643 mini-SAS HD, internal, right-angle connector
5.5 Electrical Characteristics
The power requirements for the LSI SAS 9300-16i HBA under normal operation are as follows:
 PCIe 12.0 V = 2.25 A
 Passive cable, nominal = 26.9 W
5.6 Thermal and Atmospheric Limits
The atmospheric limits for the LSI 12Gb/s SAS HBA are as follows:
 Temperature range: 0 °C to 55 °C (32 °F to 131 °F) (dry bulb)
 Relative humidity range: 5% to 90% noncondensing
 Maximum dew point temperature: 32 °C (89.6 °F)
 Minimum airflow: 200 linear feet per minute at 55 °C inlet temperature
The following limits define the storage and transit environment for the LSI 12Gb/s SAS HBA:
 Temperature range: –45 °C to +105 °C (–49 °F to +221 °F) (dry bulb)
 Relative humidity range: 5% to 90% noncondensing
,3)
,3)
*
0ORT
*
0ORT
0ORT
0ORT
*
,%$
,%$
,3)
,3)
,3) 3!
,3 3!3