Avago Technologies SAS 9207-4i4e Host Bus Adapter - Manual (Page 6)

Avago Technologies
- 6 -
LSI SAS 9207-4i4e PCI Express to 6Gb/s SAS HBA User Guide
October 2014 LSI SAS 9207-4i4e HBA Characteristics
5.4 Physical Characteristics
The LSI SAS 9207-4i4e HBA is a 6.6-in. x 2.7-in., low-profile board. The component height on the top and bottom of the
LSI SAS 9207-4i4e HBA follows the PCIe specification. The following figure shows the board layout.
Figure 1 LSI SAS 9207-4i4e HBA Board Layout
 EC1: PCIe x8-lane board edge connector
 J6: SFF-8088, mini-SAS external connector
 J7: SFF-8087, mini-SAS internal connector
 CR1: Heartbeat LED
 J5: UART connection
5.5 Power Requirements
The maximum power requirements for the LSI SAS 9207-4i4e HBA under normal operation are as follows:
 PCIe 12.0 V = 1.3 A
 Power
— Nominal = 9.8 W
— Worst case = 16.0 W
5.6 Thermal and Atmospheric Limits
The atmospheric limits for the LSI SAS 9207-4i4e HBA are as follows:
 Temperature range: 0 °C to 55 °C (32 °F to 131 °F) (dry bulb)
 Relative humidity range: 5 percent to 90 percent noncondensing
 Maximum dew point temperature: 32 °C (89.6 °F)
 Minimum airflow: 200 linear feet per minute
The following limits define the storage and transit environment for the LSI SAS 9207-4i4e HBA:
 Temperature range: 45 °C to +105 °C (49 °F to +221 °F) (dry bulb)
 Relative humidity range: 5 percent to 90 percent noncondensing
*
%#
,3)3!3
?
*
*
#2