Technical support – Avago Technologies MegaRAID SAS 9280-24i4e User Manual
Page 12
Page 12
LSI Corporation Confidential
|
May 2010
MegaRAID SAS 9280-24i4e RAID Controller Quick Installation Guide
Technical Support
RAID 50 (RAID 5 and RAID 0 in spanned groups) – RAID 50 uses both parity and
drive striping across multiple drives to provide complete data redundancy. RAID 50
provides high data throughput rates.
RAID 60 (RAID 6 and RAID 0 in spanned groups): RAID 60 uses both distributed
parity across two parity drives and drive striping across multiple drives to provide
complete data redundancy and high fault tolerance.
NOTE: Refer to the MegaRAID SAS Software User’s Guide on the MegaRAID Universal
Software Suite CD for more information about RAID levels
Technical Support
For assistance in installing, configuring, or running the SAS 9280-24i4e RAID controller,
contact an LSI Technical Support representative.
Click the following link to access the LSI Technical Support page for storage and board
support:
://www.lsi.com/support/storage/tech_support/index.html
From this page, you can send an email or call Technical Support, or submit a new
service request and view its status.
E-mail:
://www.lsi.com/support/support_form.html
Phone Support:
://www.lsi.com/support/storage/phone_tech_support/index.htm
l
1-800-633-4545 (North America)
00-800-5745-6442 (International)
NOTE: The international toll-free number does not require country-specific access
codes.