Technical support – Avago Technologies MegaRAID SAS 9260-4i User Manual
Page 7
LSI Corporation
- 7 -
MegaRAID Advanced Software Options Hardware Key Quick Installation Guide
July 2011
Technical Support
6.
Insert the J1 connector into the J1A5 header so that the two connectors are firmly attached.
7.
Reinstall the cover on the computer.
8.
Reconnect the power cords, and turn on the power to the computer.
Technical Support
For assistance in installing your MegaRAID Advanced Software Options Hardware Key, contact an LSI Technical
Support representative.
Click this link to access the LSI Technical Support page for storage and board support:
http://www.lsi.com/about/contact/pages/support.aspx
From this page, you can send an email or call LSI Technical Support, or you can submit a new service request and view
the status of the request.
E-mail:
ww.lsi.com/support/email/Pages/default.aspx
Telephone Support:
ww.lsi.com/support/Pages/call-us.aspx
1-800-633-4545 (North America)
00-800-5745-6442 (International)
Support Request:
Documents and Downloads:
CAUTION Before you install the RAID controller, make sure that the computer is disconnected from the
power and from any networks.
NOTE Make sure you turn on the power to the SAS devices and the SATA II devices before or at the same
time that you turn on the power to the host computer. If you turn on the power to the computer before
you turn on the power to the devices, the computer might not recognize the devices.
NOTE The international toll-free number does not require a country-specific access code.